Construction conditions of polypropylene waterproof non-woven fabric

The construction conditions of polypropylene waterproof non-woven fabric, 　　 polypropylene waterproof non-woven fabric is a kind of waterproof membrane, polypropylene waterproof non-woven fabric, this kind of membrane is generally directly constructed on the ground and can be directly spread on the wall. This material generally cannot be used outdoors, it can only be used indoors, and it can only be used in combination with wall sand ash. Polypropylene cloth waterproofing needs to find the base layer during construction, and then need to configure some adhesives. The processing part is more complicated, because it can only be used indoors. The characteristics of polypropylene waterproof non-woven fabrics: 　　1, polypropylene cloth waterproof structure has good stability; 　　2, polypropylene cloth waterproof performance will not weaken with time; 　　3, polypropylene cloth waterproof is a kind of impermeable material ;　　4. During ground construction, it can be well bonded with wall sand ash.　　 Disadvantages: not conducive to outdoor use. Polypropylene waterproof non-woven fabric construction conditions: 　　1, the base layer must be flat, solid, and no clear water; 　　2, the male and female corners at the junction of the flat facades should be made uniform, flat and smooth rounded corners, with a small radius of 50mm. The small radius of the external angle is 20mm; 　　3, the sharp hard objects protruding from the surface of the base layer, mortar bumps, etc. should be removed. When it cannot be removed, the cement mortar surface covering treatment should be used. The surface arc radius should be greater than 300mm. And remove the dust and debris, the yin and yang corners, the root of the pipe, etc. should be carefully cleaned; 　　 4. After the components that pass through the base layer are installed, they can be waterproofed. When producing polypropylene non-woven fabrics, the current good raw materials are used to ensure the quality while ensuring its appearance. It can give full play to its role when used. It has a strong anti-corrosion and anti-aging effect. During production, we have spunlaced or hot-rolled reinforcement before forming polypropylene fabric. 　　Using normal temperature construction, polypropylene non-woven fabrics are quoted, directly using cement to add special matching glue to cement glue to paste the composite coil with the base layer. Traditional hot construction and cold construction are convenient and rapid, reduce labor intensity, reduce environmental pollution, and improve work efficiency.　　Quanzhou Non-woven Fabric Co., Ltd. is a professional manufacturer of non-woven fabrics, with a complete and scientific quality management system. Mainly produce non-woven fabrics, non-woven bags, anti-adhesive non-woven fabrics, polypropylene non-woven fabrics, PP non-woven fabrics, etc. The products sell well at home and abroad. If you have any purchase requirements, please call for consultation! Previous: Application of agricultural non-woven fabrics on greenhouse vegetables