Melt-blown non-woven industry development in China and producers to inventory

But decades melt-blown nonwoven technology was introduced into China. In 1994, the Chinese melt-blown production line have been introduced. At the beginning of the development, due to the purchase price is high, high production cost, high melt-blown products prices, coupled with inadequate understanding of product performance and use, melt-blown market can't open. Given the performance of the melt-blown non-woven fabric, its development has inseparable relation with public events, usually will speed up development of melt-blown industry. Such as bird flu makes limited poultry, feather less price is high, applied to clothing melt-blown/three-dimensional crimp polyester staple fiber composite heat preservation cotton arises at the historic moment. The outbreak of the ebola outbreak, blocking filtration material demand. And in their fight against SARS, and SMS non-woven fabrics, but also for its excellent protection, isolation function won the recognition and favor of the market, attracted a large scale. In recent years, the governance haze brought to the attention of the national level and the social widespread attention, cloth masks, air filtration material, sewage treatment, and other products demand continued to enlarge, dosage increased, promoted the melt-blown industry output growth and development in the field of application. With the continuous development of melt-blown technology, the application of melt-blown non-woven fabrics are also constantly expanding, and extending to more fields. At present, the trend is still in development. Before the outbreak, because China melt-blown non-woven industry 'tepid' for a long time of development, the overall production capacity has been relatively modest, domestic production of melt-blown cloth there aren't many large factories, present the situation of small and scattered industry as a whole. According to the industrial textiles industry association statistics, in 2018 China law melt-blown non-woven production capacity of 83240 tons, the actual output of 53523 tons. Up to the end of December 2018, the domestic continuous melt-blown non-woven manufacturers only 61, reduce the nine from the previous year, production line 136, less than the previous year 2. In earlier in 2015, the number of such melt-blown fabric production line is 145. At present domestic melt-blown fabric manufacturers including constant day ka wah nonwovens co. , LTD. , tianjin teda clean materials co. , LTD, rich berry international group, shandong tuan non-woven co. , LTD. , xinlong holdings ( Group) The auspicious light group co. , LTD. , dalian, quantum Jin Zhou ( Tianjin) Nonwovens co. , LTD, Shanghai industrial co. , LTD. , its new materials science and technology ( Shanghai) Co. , LTD. , dalian HuaGuan non-woven equipment engineering co. , LTD. , zhejiang Garrett filtering technology co. , LTD. , jiangsu beautiful ocean, suzhou jiahe, jiangyin amway d, etc. Since the Spring Festival, these companies have to work overtime, tried all ways to ensure melt-blown fabric production, find ways to improve productivity, contributing to the outbreak. Non-woven top 40 of the world's leading berry international group ( Berry) In foshan nanhai factory put into production in 2019, a new Finn melt-blown line, now the melt-blown line has full potential, to producing medical melt-blown filter material. According to Berry, HHS group's general manager Mr Cui Yanzhao introduction, the company's patent Meltex electrostatic in extremely melt-blown materials can provide excellent filtering effect, to 0. 3 micron particles interception efficiency of up to 99. 97%. Now their daily production 1 ton this kind of material, can be done about 30-1 million medical surgical masks or 500000 N95 mask. Dalian the auspicious light group production of mask filter material, glue, a thermal spray membrane protective clothing, clothing fabrics through the quality inspection center of liaoning province, in conformance with prescribed technical standards of YY0469 medical surgical masks, GB19082 technical standards of the disposable protective clothing. At present, the respirator filter material production 8 - every day 9 tons for mask processing enterprises to produce about 800 - 9 million masks; Various protective fabrics can nissan 30 tons, can produce 200000 pieces of clothing, protective clothing; Disinfecting wipes materials can be nissan more than 200 tons. Is particularly worth mentioning is that the key of melt-blown technology is in extremely, dalian the auspicious light through the secondary development in a formula and optimizing technology, masks melt-blown materials have been produced by 30%, the current in the saturated production state. Constant day ka wah currently 5 non-woven fabric production line has been put into production, to provide customers all over the country every day 120 tons of medical eisai non-woven products, raw materials of melt-blown filter material 16 tons a day, 32 million can be used as ordinary surgical masks filter material. Teda according to emergency epidemic development launched four production lines, production capacity of 10 tons a day, for the production of 7 million to 8 million masks. And the production of surgical masks filter material can reach Europe and the United States EN14683, ASTM2100 standards and YY - in our country 0469、GB- 19083 standard, the filtration efficiency bacteria ( BFE） , particle filtration efficiency ( PFE） And virus filtering efficiency ( VFE） All can reach above 99%. Shandong tuan rich non-woven co. , LTD. , currently has seven melt-blown production line, daily output of 15 tons, the cloth of melt-blown bacteria blocking rate is above 95%, consistent with the medical level. Xinlong and another technology have 2 and 4 melt-blown fabric production line, daily output about 4 tons and 8 tons respectively. Quantum Jin Zhou annual grade resumed production and emergency enabled a new production line, the realization of highly automated production. The two production lines, nissan 4 tons of melt-blown efficient filter material, basically daily delivery three cars to four cars. Who put money on the new production line upgrading, the original a mask melt-blown extended to 3 cloth production lines, high-quality melt-blown fabric production increased to 3 tons, and therefore had to give up higher yield and output value in some larger production orders, to go all out in the production of high quality melt-blown non-woven material ( BFE99 and KN95) 。