NEWS
One hundred companies PK
Latest products
Meltblown non-woven fabric and spunlace non-woven fabric
by：Sunshine
2021-04-05
The meltblown non-woven fabric uses polypropylene as the main raw material, and uses high-speed hot air flow to draw the thin stream of polymer melt extruded from the nozzle orifice of the die, thereby forming ultra-fine fibers and collecting them on the condensation screen or roller At the same time, it adheres to itself to become a melt-blown non-woven fabric.
SMS, SMMS and SMMMS of medical tertiary anti-spunbonded meltblown composite non-woven fabrics still rely on imports. After SARS, domestic SMS non-woven fabrics developed rapidly. In 2006, a production capacity of more than 60,000 tons was formed. However, due to technical and equipment reasons, the production line was started abnormally, with an output of only more than 20,000 tons and an operating rate of only 30%. By 2010, my country's online composite SMS non-woven fabric production capacity reached 260,000 tons, with an output of 91,000 tons. Since thin and medium-thickness SMS non-woven fabrics are mainly used for medical and sanitary products, their original production capacity matches that of protective clothing and masks. The current surge in demand for downstream protective products has also led to a shortage of SMS non-woven fabrics.
Meltblown non-woven fabric is used for the filter layer of masks.
Spunlace non-woven fabrics spray high-pressure fine water jets on one or more layers of fiber webs to entangle the fibers, so that the webs can be reinforced and have a certain strength. The resulting fabric is spunlace-free. Spinning cloth.
The clean and high whiteness viscose staple fiber is mainly used to produce spunlace non-woven fabrics. Spunlace non-woven fabrics can be used to produce masks, gauze, surgical quilts, medical towel pads, wet wipes, facial masks, cotton pads, and clothing linings. And other products.
Spunlace non-woven fabrics are used for the outer and inner layers of masks.
SMS, SMMS and SMMMS of medical tertiary anti-spunbonded meltblown composite non-woven fabrics still rely on imports. After SARS, domestic SMS non-woven fabrics developed rapidly. In 2006, a production capacity of more than 60,000 tons was formed. However, due to technical and equipment reasons, the production line was started abnormally, with an output of only more than 20,000 tons and an operating rate of only 30%. By 2010, my country's online composite SMS non-woven fabric production capacity reached 260,000 tons, with an output of 91,000 tons. Since thin and medium-thickness SMS non-woven fabrics are mainly used for medical and sanitary products, their original production capacity matches that of protective clothing and masks. The current surge in demand for downstream protective products has also led to a shortage of SMS non-woven fabrics.
Meltblown non-woven fabric is used for the filter layer of masks.
Spunlace non-woven fabrics spray high-pressure fine water jets on one or more layers of fiber webs to entangle the fibers, so that the webs can be reinforced and have a certain strength. The resulting fabric is spunlace-free. Spinning cloth.
The clean and high whiteness viscose staple fiber is mainly used to produce spunlace non-woven fabrics. Spunlace non-woven fabrics can be used to produce masks, gauze, surgical quilts, medical towel pads, wet wipes, facial masks, cotton pads, and clothing linings. And other products.
Spunlace non-woven fabrics are used for the outer and inner layers of masks.
Custom message
