Non-woven fabric cutting

Non-woven fabric cutting: in 1995, trane into beautiful Seth group, non-woven fabric cutting ( Model MC18/400830/1898) In the process of production according to the different needs of wide materials slicing, cutting, etc. A device. Non-woven non-woven fabric cutting machine is mainly used for cutting application fields of the coil to Eric cutting into various article is suitable for the narrow coil production needs, including coil and winding process two process. Put the coil and winding tension control is a key link in the process of cutting machine. Non-woven fabric cutting is the original electric control system based on increased automatic edge control, to achieve the ideal effect, improve the machine performance, make the machine more stable in high speed and durability. Non-woven fabric cutting machine features (1) is made of thick steel plate welding and become strong, point of balance, the balance of machine under high speed working condition; (2) the whole machine adopts the chrome-plated steel tube, each treated with dynamic balance; (3) to adopt 3 inch inflatable scroll, rolling up to 600 mm in diameter, the biggest with the installation of automatic tension controller and magnetic powder on the edge; (4) cutter can use industrial operation blade or flat type ( Artist blade) 18毫米, Adjustable cutter between 1600 mm (5) winding adopts three inches inflatable scroll and magnetic powder tension controller folios cutting and simple operation, maximum winding diameter is 600 mm; 6 spindle and circular knife use CVT system and can be used as high and low adjusting speed and positive &negative switching system; Electronic speed control system, when using, manually adjust the speed of the machine, convenient and simple; 7) equipped with high precision correction device system, thus further ensure the advantages of non-woven fabric cutting and cutting precision in the original electric control system based on increased automatic edge control, to achieve the ideal effect, improve the machine performance, make the machine more stable in high speed, winding flat, simple and convenient operation, safe and reliable, strong durability. Non-woven fabric cutting and main components ( A) Chassis parts ( 2) The winding part ( 3) Rolling parts ( 4) Cutter part ( 5) The host portion ( 6) Guide roller part using the environment and characteristics of using the environment: the machine should be installed in a dry, ventilated place, the light is good, convenient operation. Machine features: balance is made of thick steel plate welding and become strong, Angle, make the machine work condition at high speed smooth note 1. The machine power supply using three phase four wire ( AC380V) And safe ground, to ensure the safety of operating personnel, 2. Should first before starting the speed of the host first transferred to the minimum speed. 3. When the blade installation should pay attention to safety, to avoid the blade cut 4. To Taiwan machine needs oiling place should be regular service 5. Configuration double-sided knife system, USES the diamond grinding, grinding wheel can be up to two years of life, the blade without disassembly can whet knife, blade keep sharp for a long time, to achieve best cutting quality. With aspiration filling quantity, keep the cloth clean and orbit