Non-woven fabric manufacturer huaqiang analysis of different characteristics and process of non-woven fabric for you

Introduction of non-woven non-woven ( English name: Non Woven Fabric or Nonwoven cloth) Also called nonwoven fabric, is composed of directional or random fiber, is a new generation of environmental protection material, has moisture-proof, breathable, flexible, qualitative light, no combustion, easy to decompose, non-toxic non-irritating, rich colors, with low cost, reusable, etc. Such as the use of polypropylene (more Pp material) Grain as raw material, by high temperature melting, spinning, steel, heat the top ranking paper for one-step production. Because of having the appearance of the cloth and some performance and called it the cloth. Huaqiang spun-bonded non-woven fabric manufacturer for your analysis method, melt-blown, spunlace non-woven fabric manufacturing process. Spun-bonded spun-bonded non-woven fabric is in polymer has been after extrusion, stretching to form a continuous filament, filament laid into the net, fiber network by self bonding, hot glue, chemical bonding or mechanical reinforcement method, make fabric non-woven fabrics. Spinning sticky method process spun-bonded non-woven fabric is in polymer has been after extrusion, stretching to form a continuous filament, filament laid into the net, fiber network after its adhesive, hot glue, chemical bonding or mechanical reinforcement method, make fabric non-woven fabrics. Characteristics of the fabric is composed of continuous filament, good tensile strength, technological change is more, can use various methods to reinforce, filament denier range wide, feel is poor, poor web evenness application: polypropylene, geotextile, tufted carpet base cloth, coated cloth, and medical materials, using the disposable products of coated materials. Melt-blown melt-blown non-woven process: polymer feeding - - - Melt extrusion - - - Fiber formation - - - Fiber cooling - - - Into the net - - - Reinforcement into cloth. Melt-blown technology process: in the polymer has been out, after leaving the spinneret hole melt at high speed under the action of the hot air blow into superfine fibre, squeeze a speed to fly to the net curtains, and then through the hot glue or adhesive reinforcement, non-woven fabrics. Characteristics of the fabric by very fine, but I don't contact of short fiber; Web uniformity is good, soft; Filter performance and fluid absorption performance is good, Fabric strength. Product application filtering material, medical and health materials, clothing materials, battery diaphragm materials, cleaning materials. Water thorn spunlaced process is to high-pressure micro flow injection into a layer or multilayer fiber net, make the fiber tangled together, so that the fabric is strengthened and have a certain strength. High-pressure micro flow injection to a layer or multilayer fiber net, make the fiber tangled together, so that the fabric is strengthened and have a certain strength. Characteristics of flexible tangles, do not affect fiber original features, not injury fiber; Look closer to the traditional textile; High strength, low burr; High hygroscopicity, rapid moisture absorption; Feel soft, good drapability appearance constant change; The production process, covers an area of big long; Equipment complex, high water quality requirements; Energy consumption is large. Product application medical shade cover, surgery and surgery, medical dressing materials, wound dressings, medical gauze, aviation cloth, clothing lining cloth, coating fabric, use disposable materials, instruments and meters high cloth, electronics industry senior cloth, towel, cotton pad, wet wipes, masks coated materials.