[Notice] What industry standards and requirements must medical non-woven fabrics meet?

[Instructions] The quality of medical non-woven fabrics must meet the national industry standards. This is a mandatory requirement. However, since there are still companies in the non-woven fabric industry that use inferior raw materials to save costs, strengthen the medical non-woven fabrics Quality inspection and supervision is an indispensable measure to ensure the quality of medical non-woven fabrics. So what industry standards and requirements must medical non-woven fabrics meet? 　　 1. Non-woven fabric packaging materials should meet the requirements of 'GB/T19663.1-2015 Terminally Sterilized Medical Device Packaging': 　　 microbial barrier, water resistance, and human tissue The compatibility, air permeability, salt water resistance, surface absorbency, toxicology test, maximum equivalent pore diameter, drape, tensile strength, wet tensile strength and burst resistance of the product are in line with relevant national regulations and should be disposable use.　　2, storage environment requirements　　The storage requirements of medical non-woven fabrics meet the requirements of YY/T0698.2-2009. That is, the temperature of the inspection, packaging and sterilization area is 20℃-23℃, the relative humidity is 30%-60%, and the mechanical ventilation is 10 times in 1 hour. The cotton dressing packing room must be separated from the equipment packing room to avoid cotton dust pollution of the equipment and Packaging materials such as woven cloth.　　3. Size requirements　　①The equipment package of the operating room: 　　, please refer to the size of the operating room equipment cart. If you need to use the non-woven packaging of the equipment to lay the table of the instrument cart, the size of the non-woven fabric must be greater than 30cm around the surface of the sagging instrument cart.　　② Irregularly shaped instruments: 　　 such as chest openers, electric drills, etc., choose a mesh basket to regularize them, and then pack them with non-woven fabric.　　 Round containers such as cotton ball cylinders are placed in the middle of the non-woven fabric, the left and right sides of the wrapping fabric are folded back and then rolled forward, and the wrapping fabric is folded back 3cm-5cm inward and then sealed.　　③Frame hook type equipment: 　　 When the inner packaging, the non-woven fabric can be fixed with tape to prevent it from loosening.　　4. Other requirements　　①Sharp or hooked devices require a protective cover for sharp devices to prevent such devices from piercing the non-woven fabric, causing device contamination and unnecessary waste of consumables.　　②Overlapping items are required to be packaged separately as far as possible. Surgery basins, treatment bowls, etc. should be packed separately. If overlapped, absorbent paper should be placed between items to reduce the wet pack rate.　　③Small screws, drills and other equipment require 　　 It is not suitable to be directly packaged in non-woven fabrics, and should be packed in mesh-type precision equipment boxes before packaging. [Instructions] For the medical and health industries and fields, the state has stipulated a series of standards and requirements to ensure the quality of medical and sanitary materials. Once medical non-woven fabrics that do not meet the requirements appear in the market, they should be The medical non-woven fabric in question is strictly destroyed. Related searches: medical non-woven tape Fujian medical non-woven fabric manufacturers ranking Medical non-woven fabric classification Previous post: Product characteristics and application fields of different types of non-woven fabrics