NEWS
One hundred companies PK
Latest products
What are the ways to paste non-woven wallpaper?
by：Sunshine
2021-04-07
Non-woven wallpaper is made of natural plant fiber non-woven technology with stronger tensile force, more environmental protection, no moldy or yellowing, and good air permeability is the main base material of high-quality wallpaper. What are the ways to paste non-woven wallpaper?
The pasting method of non-woven wallpaper is as follows:
1. Wallpaper cutting
Place the wallpaper according to the serial number of the wallpaper, measure the height of the wall, set aside 5 cm above and below the height of the wall to cut the wallpaper, remember to cut one roll of wallpaper at a time to prevent quality problems.
2, wall treatment
The wall should be flat, clean, dry, uniform in color, and free of voids, unevenness of convexity and concave. The wall should be treated with base film (or varnish) before construction.
3, brush wallpaper glue
The glue for sticking non-woven wallpaper must be evenly painted on the wall, and the thickness is only 2mm. Never brush the glue directly on the back of the non-woven fabric, let alone soak it in water. Unlike other wallpapers, non-woven fabrics should have a thicker and thicker glue than other wallpapers to reduce their fluidity.
4. Wallpapering
Post the non-woven wallpaper in the order compared in advance.
5. Construction wallpaper cutting
It is necessary to lay the sides and cut the construction. The specific method is to lay the sides during the construction. The number of the sides depends on the pattern, about 3 cm. The plain non-woven fabric is constructed by the method of front and back paste during construction. After ensuring that the pattern is aligned, use a ruler to press the overlapped area to cut the pattern.
6. Clean after wallpaper is pasted
If there is dust on the surface after construction, use a short-bristled brush or duster to wipe it lightly. Do not wipe with a wet towel to cause the pollution to expand.
When we all post the non-woven wallpaper, we can follow the above posting method. This is what we all need to do. The correct method is what we all need to do.
The pasting method of non-woven wallpaper is as follows:
1. Wallpaper cutting
Place the wallpaper according to the serial number of the wallpaper, measure the height of the wall, set aside 5 cm above and below the height of the wall to cut the wallpaper, remember to cut one roll of wallpaper at a time to prevent quality problems.
2, wall treatment
The wall should be flat, clean, dry, uniform in color, and free of voids, unevenness of convexity and concave. The wall should be treated with base film (or varnish) before construction.
3, brush wallpaper glue
The glue for sticking non-woven wallpaper must be evenly painted on the wall, and the thickness is only 2mm. Never brush the glue directly on the back of the non-woven fabric, let alone soak it in water. Unlike other wallpapers, non-woven fabrics should have a thicker and thicker glue than other wallpapers to reduce their fluidity.
4. Wallpapering
Post the non-woven wallpaper in the order compared in advance.
5. Construction wallpaper cutting
It is necessary to lay the sides and cut the construction. The specific method is to lay the sides during the construction. The number of the sides depends on the pattern, about 3 cm. The plain non-woven fabric is constructed by the method of front and back paste during construction. After ensuring that the pattern is aligned, use a ruler to press the overlapped area to cut the pattern.
6. Clean after wallpaper is pasted
If there is dust on the surface after construction, use a short-bristled brush or duster to wipe it lightly. Do not wipe with a wet towel to cause the pollution to expand.
When we all post the non-woven wallpaper, we can follow the above posting method. This is what we all need to do. The correct method is what we all need to do.
Custom message
