What requirements must medical non-woven fabrics meet?

The quality of medical non-woven fabrics must meet the national standards. This is a mandatory requirement. However, since there are still companies in the non-woven fabric industry that use inferior raw materials to save costs, the quality inspection and Supervision is an indispensable measure to ensure the quality of medical non-woven fabrics. So what are the requirements for medical non-woven fabrics? 　　 1. Non-woven fabric packaging materials should meet the requirements of 'GB/T19663.1-2015 Terminally Sterilized Medical Devices Packaging': 　　 microbial barrier, water resistance, compatibility with human tissues Performance, air permeability, salt water resistance, surface absorption, toxicology test, maximum equivalent pore size, drape, tensile strength, wet tensile strength and burst resistance, etc., all comply with relevant national regulations and should be used once.　　2, storage environment requirements　　The storage requirements of medical non-woven fabrics meet the requirements of YY/T0698.2-2009. That is, the temperature of the inspection, packaging and sterilization area is 20℃-23℃, the relative humidity is 30%-60%, and the mechanical ventilation is 10 times in 1 hour. The cotton dressing packing room must be separated from the equipment packing room to avoid cotton dust pollution of the equipment and Packaging materials such as woven cloth.　　3, size requirements　　①Instrument bag in operating room: 　　, please refer to the size of the operating room instrument cart. If you need to use the non-woven packaging of the instrument to lay the instrument cart table, the size of the non-woven fabric must be greater than 30cm around the sagging instrument cart table.　　② Irregularly shaped instruments: 　　 such as chest openers, electric drills, etc., choose a mesh basket to regularize them, and then pack them with non-woven fabrics.　　 Round containers such as cotton ball cylinders are placed in the middle of the non-woven fabric, the left and right sides of the wrapping fabric are folded back and then rolled forward, and the wrapping fabric is folded back 3cm-5cm inward and then sealed.　　③Frame hook type equipment: 　　 When the inner packaging, the non-woven fabric can be fixed with tape to prevent it from loosening.　　4. Other requirements　　①Sharp or hooked devices require a sharp device protective cover to prevent such devices from piercing the non-woven fabric, causing device contamination and unnecessary waste of consumables.　　②Overlapping items are required to be packaged separately as far as possible 　　 Surgical basins, treatment bowls, etc., should be packaged separately, if they need to be stacked, absorbent paper should be placed between the items to reduce the wet pack rate.　　③Small screws, drills and other equipment require 　　 It is not suitable to be directly packaged in non-woven fabrics, and should be packed in mesh-type precision equipment boxes before packaging. For the medical and health industries and fields, the state has stipulated a series of standards and requirements to ensure the quality of medical and sanitary materials. Once there is a medical non-woven fabric that does not meet the requirements in the market, the medical The non-woven fabric is strictly destroyed. Previous: Contact Number of Non-woven Fabric Manufacturers in Quanzhou, Fujian