Sub-station

( What should spun-bonded non-woven wallpaper paste? ]

by:Sunshine     2020-05-15
In domestic outfit now optional types have a lot of style, but between friends and relatives will appear many of the same decorate a style. So some of them are not satisfied with this, think of its own. So, good solution is to make the wallpaper the highlight of your home. Spun-bonded non-woven fabric is regarded as green environmental protection material, can fire retardant, but also has good water absorption, sound-absorbing, can be applied to the wallpaper. Spun-bonded non-woven wallpaper visual effect is good, feel is good, environmental protection. When paste spun-bonded non-woven wallpaper, we need to pay attention to the following: 1, spun-bonded non-woven wallpaper tailored according to the serial number of wallpaper will set the wallpaper, measuring the height of the wall, according to the height of the wall above and reserve 5 cm cutting wallpaper, bear in mind that a cutting out a roll of wallpaper, in case of quality problems. 2, paste the metope of spun-bonded non-woven processing requirement level off, clean, dry, metope color uniform, should be no gap, convex concave inequality defects, brush metope should be done before the construction base membrane ( Or varnish) To deal with. 3, brush spun-bonded non-woven wallpaper glue stick spun-bonded non-woven wallpaper glue must brush equably on metope, can be in 2 mm thickness, never brushed glue directly on the back of the non-woven fabric, more do not soak wet. Spun-bonded non-woven wallpaper is unlike any other, should be thicker than the other wallpaper glue is thicker, and decreased its liquidity. 4, paste spun-bonded non-woven wallpaper in prior than good order for Posting spun-bonded non-woven wallpaper. 5, when construction of spun-bonded non-woven wallpaper cutting to length on the laying construction, concrete method is on during the construction, on how many depends on pattern, about 3 cm long, plain non-woven fabric adopts the method of positive and negative paste construction during construction, flowers model after ensure pattern alignment, the overlap with straightedge pressure, cutting, try to avoid in the Yang Angle cutting, lest cause Yang wallpaper become warped edge Angle, make sure the cutting blade when cutting, there shall be no burrs, at the same time pay attention to the strength under the knife, to ensure that a cutting, make a clean break, but also cannot too hurt the surface of the wall. After 6, spun-bonded non-woven wallpaper paste if surface dust, clean construction after application of short brush or duster gently brushed, can't use a wet towel to wipe the pollution caused by the expanding. Dongyang lai chi environmental protection technology co. , LTD, is a critically acclaimed non-woven fabric manufacturer, specializing in the production sales: non-woven fabric, elastic nonwoven, spun-bonded non-woven fabrics, medical non-woven fabric. Lai chi spun-bonded non-woven qualitative light, soft, breathable, non-toxic environmental protection, ensure the quality of products, be sure to allow customers to buy rest assured that with the peace of mind.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Dear friend, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time. Contact email:lauren@nonwovenfactory.com Whatsapp&Tel:+86 152 6086 7307