Furniture non-woven fabric _ furniture sofa bottom non-woven fabric?

Furniture non-woven fabric is a non-woven fabric that directly uses polymer slices, short fibers or filaments to make fibers through air flow or mechanical mesh, and then through Spurs, acupuncture, or hot rolling reinforcement, finally, the unwoven fabric formed after finishing. New fiber products with soft, breathable and planar structure have the advantages of not producing fiber chips, being strong, durable, silky and soft, and also having the feeling of cotton. Compared with cotton fabrics, non-woven bag is easy to form and cheap. Several classifications and characteristics of furniture non-woven fabrics: 1. The processing process of spunlaced non-woven fabrics is to spray high-pressure fine water flow onto a layer or multi-layer fiber net to tie the fibers together, so that the fiber net can be reinforced and has a certain strength. 2. Wet non-woven fabric is to mix the fiber raw materials placed in water medium with different fiber raw materials to make fiber suspension slurry, which is transported to the mesh forming mechanism, the fiber is made into a net and then fixed into a cloth in a wet state. 3, heat-bonded non-woven fabric refers to the fiber or powder hot-melt bonding reinforcement material added to the fiber net, and then the fiber net is heated, melted, cooled and reinforced into a cloth. 4. The spunbonded non-woven fabric is laid into a net after the polymer has been squeezed out and stretched to form a continuous filament, and the fiber net is then bonded by itself, hot bonding, chemical bonding or mechanical reinforcement, make the fiber mesh into a non-woven fabric. 5, airflow mesh non-woven fabric can also be called clean paper, using airflow mesh technology to needle the wood pulp fiber into a single fiber state, and then using the airflow method to make the fiber agglomerate on the mesh curtain, the fiber net was finally reinforced into a cloth.