Have you heard of or non-woven wallpaper? ? ?

In today's life, wallpaper has become an indispensable material for our home decoration. It can decorate our house and avoid the harm to the human body caused by the toxic gas caused by paint and wall painting. As a high-end decoration wallpaper, non-woven fabric is more and more popular with owners for its pure color, visual comfort, soft touch, sound absorption and breathability. Non-woven wallpaper is different from ordinary wallpaper, so some details in the pasting method need to be paid attention to.　　Precautions for pasting non-woven wallpaper　　 1. After the base paint coating is dry during construction, draw a vertical line as a standard to avoid incorrectly pasting the wallpaper. 2. Do not use a hard scraper or nylon brush after the wallpaper is on the wall. You should use a soft brush to gently scrape from top to bottom to smooth the surface of the non-woven fabric to remove bubbles and wrinkles. Do not scrape the glue out of the joints to avoid pollution If you accidentally squeeze the glue out of the surface, wipe it off with a dry towel immediately, and try to keep your hands clean during construction.　　3. During the construction, the construction should be inspected, and the construction should be stopped immediately if the problem is found, and the cause and solution should be found before the construction. Non-woven wallpaper is now the most popular environmentally friendly wall decoration material. The base material of non-woven wallpaper on the market is mainly imported, and the process is relatively complicated. Therefore, the price of non-woven wallpaper is relatively high, so everyone When choosing, we must first do the budget problem. Pasting method of non-woven wallpaper: 　　 1. Wallpaper cutting Place the wallpaper according to the serial number of the wallpaper, and measure the height of the wall. According to the height of the wall, 5 centimeters are reserved for cutting the wallpaper. Remember to cut one roll at a time Wallpaper to prevent quality problems.　　2, wall surface treatment　　The wall surface should be smooth, clean, dry, uniform in color, free of voids, uneven convexities, and uneven defects. The wall surface should be treated with a base film (or varnish) before construction.　　3. Brush wallpaper glue 　　 paste non-woven wallpaper glue must be evenly painted on the wall, the thickness is only 2mm, never brush the glue directly on the back of the non-woven fabric, let alone soaking wet paste. Unlike other wallpapers, non-woven fabrics should have a thicker and thicker glue than other wallpapers to reduce their fluidity.　　4. Paste wallpaper　　 Post the non-woven wallpaper in the order of comparison. 5. The cutting of construction wallpaper requires side-to-side cutting construction. The specific method is to lay the sides during construction. The number of sides depends on the pattern, about 3 cm. The plain non-woven fabric is pasted in front and back during construction. Method of construction. After ensuring that the pattern is aligned, use a ruler to press the overlapping area to cut the pattern. Try to avoid cutting at the outside corner to avoid warping the wallpaper at the outside corner. Make sure to cut it when cutting. The knife should be sharp and should not have burrs. At the same time, pay attention to the strength of the knife. Make sure to cut and cut two pieces at a time, but not excessively damage the surface of the wall.　　6. u200bu200bClean after the wallpaper is pasted　　 If there is dust on the surface after construction, apply a short-bristled brush or duster to wipe it, and do not wipe it with a wet towel to cause the pollution to expand.　　Quanzhou Nonwovens Co., Ltd. is a professional manufacturer of environmentally friendly nonwovens, with a complete and scientific quality management system. Non-woven fabric, your right choice. Previous post: What are the advantages of planting agricultural non-woven fabrics?