How to distinguish color masterbatch and filling masterbatch

If you don’t understand the filler masterbatch industry, those who don’t know how to fill masterbatch will ask, how do you distinguish between masterbatch and filler masterbatch? There are many kinds of filler masterbatches in my country, and the filler masterbatches of different application fields and different powders are not the same. Before we understand these filler masterbatch products, we should first understand their different functions. Whenever it is used, as long as we understand the properties of the filler masterbatch and the different characteristics of different masterbatch products, we know how to identify the filler masterbatch. The specific differences and characteristics of Capgemini plastic masterbatch and filler masterbatch are as follows: Filler masterbatch: The characteristics of filler masterbatch: good solubility, good plasticity, strong anti-oxidation, anti-aging ability, large filling volume, and increase the hardness of filled products. Rigidity, compression resistance and abrasion resistance reduce the shrinkage of products. Deformation caused by shrinkage. Used in most plastic blown films, injection molding, pipes, plates, etc., to reduce the production cost of enterprises. Color masterbatch: A mixture of high-concentration colors is made of resin and a large amount of pigments (up to 50%) or dyes. In the process of processing, a small amount of masterbatch is mixed with uncolored resin to obtain colored resin or products with designed pigment concentration. Commonly used color masterbatch characteristics: use ordinary carbon black polyethylene resin as the carrier, and experience high temperature and high density. Ordinary carbon black is highly adaptable and easy to take time out. Used for ordinary resin, blown film, wire, pipe, plastic, plastic, wire drawing, etc. Based on the above information, we can conclude that the masterbatch is different from the filling masterbatch. Although masterbatch and masterbatch have something in common with plastics and plastic products, their functions are different. The main color is one type, and the other is the main fill. This is the difference between them.