Laminated non-woven fabric using wool spinning semi-mechanical layering and mixing process

A variety of different processes can be made into coated non-woven fabrics, but the subtle changes will cause huge differences in the finished products. At present, the more mature laminating process we are using is not familiar to us. Although it is a very mature process, it also has its shortcomings. Today we introduce whether the semi-mechanical laminating process of wool spinning meets the requirements of laminating non-woven fabrics. What about development requirements? This kind of technological process is intermittent production, and three Chumao warehouses are needed for the subsequent process of continuous production. The equipment of this technological process is simple, the mixing is uniform, and the output is high. It is a commonly used domestic equipment supporting program for the production of thick coated non-woven fabrics. It is suitable for the processing of various wool synthetic fibers or raw wool. The output is about 200 kg per unit. However, due to the high cost of this production process, it will greatly increase the cost of coated non-woven fabrics, thereby reducing market competitiveness, but there is not much difference in quality from the coating process, so it is not widely optimistic. .