Non-woven fabric slitting

Non-woven fabric slitting: Trane was incorporated into the Meses Group in 1995. Non-woven fabric slitting (model MC18/400830/1898) slices and slits wide materials according to different needs during the production process. A device.


Non-woven fabric slitting application field


Non-woven fabric slitting machine is mainly used to slit wide and wide webs into various narrow webs suitable for production needs. The slitting process includes two processes: unwinding and winding. The tension control of unwinding material and winding material is the key link of the slitting machine. Non-woven fabric slitting is based on the original electronic control system with automatic edge alignment control, which achieves the ideal effect, improves the working performance of the machine, and makes the machine more stable and durable in high-speed operation.


Features of non-woven fabric slitting machine


①The thick steel plate is welded to make it firm and the angle is balanced, so that the machine is balanced under high-speed working conditions;


②The whole machine is made of chrome-plated steel pipes, each of which is dynamically balanced;


③The unwinding adopts a 3-inch inflatable unwinding shaft, the maximum unwinding diameter can reach 600mm, and it is equipped with a magnetic powder tension controller and an automatic edge-aligning device;


④The cutter can use industrial scalpel blade or flat knife (art blade), adjustable knife between 18mm-1600mm


⑤The rewinding adopts a 3-inch inflatable reel and a magnetic powder tension controller hand-rolled, the slitting operation is simple, and the maximum rewinding diameter can reach 600mm;


⑥The main shaft and the circular knife use a stepless speed change system, which can be used as a high-low speed control and forward and reverse switching system; an electronic speed control system, which is convenient and simple to adjust the speed of the machine manually during use;


⑦Equipped with high-precision correction device system to further ensure cutting accuracy


Advantages of non-woven fabric slitting


On the basis of the original electronic control system, the automatic edge alignment control is added, which achieves the ideal effect, improves the working performance of the machine, makes the machine more stable in high-speed operation, smooth winding, simple and convenient operation, and safe Reliable and durable.


The main composition of non-woven fabric slitting


(1) Rack Part


(2) Rewinding part


(3) Unwinding part


(4) Cutter part


(5) Host part


(6) Guide roller part


Use environment and characteristics


Operating environment: The machine should be installed in a dry, ventilated, well-lit, and easy-to-operate place.


Features of the machine: It is welded with thick steel plates to be firm and balanced in angle, so that the machine is stable at high speed.


Matters needing attention


1. The machine power supply uses three-phase four-wire (AC380V) and is safely grounded to ensure the safety of operators


2. Before turning on the computer, you should first adjust the host speed to the lowest speed


3. Pay attention to safety when installing the blade to prevent the blade from scratching


4. The place where the machine needs to be refueled should be maintained regularly


5. Equipped with double-sided sharpening system, using diamond grinding, the life of the grinding wheel can be up to two years, the blade can be sharpened without disassembly, and the blade remains sharp for a long time to achieve the best cutting quality. It also comes with vacuum equipment to keep the cloth and track clean