Polyester (PET) non-woven fabric material and polyester (pet) non-woven fabric use

The characteristics (advantages) of Yudeng polyester (pet) spunbond non-woven fabric: high strength, good high temperature resistance (can be used for a long time in an environment of 150 ℃), aging resistance, UV resistance, high elongation, stability and air permeability Good, corrosion-resistant, soundproof, mothproof, non-toxic. Polyester (pet) spunbond non-woven fabric introduction edit product specifications Maximum width after trimming: 3200mm Maximum package diameter: 1500mm Weight range: 10-130g/㎡ Color: Color can be customized Main use 1. Household products: clothing Softeners and additives, vacuum cleaner bags. 2. Packing: cable cloth, handbag, container bag, flower wrapping material. 3. Decoration: wall decoration cloth, floor leather base layer, static flocking base cloth. 4. Agriculture: agricultural harvest cloth, crop and plant protection, weed protection belt. 5. Waterproof material: base fabric of high-grade breathable (wet) waterproof material. 6. Industrial applications: filter materials, insulation materials, electrical appliances, reinforcement materials, support materials. 7. Car decoration materials. 8. Others: composite film base cloth, baby and adult diapers, sanitary napkins, protective articles, etc., disposable sanitary materials. The market and application of polyester (pet) spunbond non-woven fabric products. Building materials include a wide range of materials. The materials involved in the use of spunbond non-woven fabrics mainly refer to roof waterproof materials, followed by wall insulation. Materials for sound insulation, wall foundation waterproofing, pipe protection, underground drainage, and prevention of tree root growth from invading buildings. At present, in my country, the application is mainly concentrated in the field of roof waterproof materials. In European and American countries, especially Europe, this kind of waterproof material with superior performance has been widely used since the late 1980s and early 1990s, with a market share of more than 40%, and most of them are based on PET spunbonded tires. The application of polyester linoleum tyre base in my country started late, and the consumption in 2000 was only 20 million m2. However, since the beginning of the new century, new waterproof materials have developed rapidly. By 2002, the application volume of modified bitumen waterproofing membrane based on PET fiber had reached 70 million m2, and it continued to grow. It is predicted that in the next 5 years, modified asphalt waterproofing membranes will continue to develop at a relatively rapid rate, and the proportion of the total amount will increase to more than 20% by 2010. The potential market for new waterproof materials in my country is very large (about 800 million to 1 billion m2). With the continuous and in-depth development of my country's economic construction, PET spunbonded linoleum base has an optimistic development prospect. The application of geotechnical materials to geotextiles began as early as the 1960s. The United States is the country with the largest consumption of geotextiles in the world. In the early 1990s, its annual consumption was over 300 million m2. In recent years, the consumption has reached 7 100 million m2. Geotextiles in Europe and Japan have also developed rapidly. In recent years, the annual consumption of geotextiles in Europe is also about 400 million m2, of which spunbonded nonwovens account for about 60% of nonwoven geotextiles; Japan in the mid-1990s The application of geotextiles will increase significantly in the future. Spunbond is the largest non-woven geotextile in Japan, accounting for about 60% of the total non-woven geotextile, and it is mainly PET spunbond. Geotextiles in our country started in the early 1980s, but the amount used at that time was very small and was only an experimental application. It was not until 1998 that the catastrophic flood attracted the attention of the government, and the construction department included the application of geotextiles in the design specifications and formulated relevant national standards. Geotextiles really received attention and development. At present, the amount of geotextiles in my country has exceeded 300 million m2, and non-woven geotextiles account for about 40% of the total. my country's civil engineering construction has a huge potential market, and its potential is by no means lower than the 700-800 million m2 currently used in the United States. Experts estimate that my country's geotextiles will continue to grow at double digits in the next 15 years, and the fastest growth rate is PET spunbonded filament geotextiles. During the 'Tenth Five-Year Plan' and the 'Eleventh Five-Year Plan' period, my country plans to invest hugely in various projects such as water conservancy, electric power, transportation, environmental protection, and river governance, including water conservancy construction, South-to-North Water Transfer Project, power investment, highways and railways. Construction and environmental engineering, as well as ports, airports, garbage disposal, rivers, lakes and seas, and sand control, etc., have an investment of more than trillion yuan. In the next 10 years or more, China will have more infrastructure projects to be built, and the demand for geotextiles will also increase. China will become the world's largest marketing market for geosynthetics. Domestic production capacity of PET spunbond nonwovens. At present, my country has about 9 PET spunbond production lines with a total production capacity of about 31,000 t/a. Among them, Yizheng Non-woven Fabric Factory, Hunan Non-woven Fabric Factory, Henan Sanli Company, Shanghai Jiasmaiwei Company, Jiangxi Guoqiao The company introduced production lines from Italy or West Germany. Shaoxing Lida, Xinjiang Tianli, Xichuan Nonwovens, Dalian Hengda, Zhejiang Yongguang Nonwovens Factory and others are domestic production lines with a minimum width of 2.4m and a maximum width of 6m. . The maximum production capacity of these production lines is 4500 t/a, and the minimum production capacity is 1000 t/a. The 4.5m width PET spunbonded geotextile and linoleum base fabric dual-use production line designed and manufactured by the Textile Industry Nonwoven Technology Development Center and operated in Xinjiang Tianli Company is a domestically produced equipment with a large production capacity and the best product quality. The production capacity is 3500 t/a. At present, the main products produced by these production lines include geotextiles, engineering impermeable materials, building waterproof materials, composite reinforcement materials, automotive fabrics, cushioning materials, chemical sheets for shoes, etc. The prospects are very impressive. Home textiles and composite materials Yudeng polyester (pet) non-woven fabric is a high-quality polyester non-woven fabric. According to the aging resistance and high temperature resistance of spunbond non-woven fabrics, it is widely used in home textiles, composite materials, luggage materials, etc. . Through high temperature transfer printing, high-end and affordable cloth is produced; and because of its aging resistance, it is well received by consumers.