Precautions for daily operation of non-woven fabrics

I believe you will see a lot of machinery and equipment in your life. It is because our technology is developing rapidly, so many of our equipment are being upgraded. However, it is because of the appearance of some machinery and equipment that many production operations are No need to do it manually, just like the emergence of non-woven fabric production machinery, gradually replacing traditional hand-made, and the quality of products produced by non-woven fabric production machinery has far exceeded hand-made, so this is Many manufacturers value it, but there are still many precautions that need to be understood in the daily operation of non-woven fabric production machinery. Let us take a look.


Non-woven fabric production machinery components and maintenance, do not allow too much moisture and oil to enter the pressure system, in order to avoid failures, shorten the service life of the cylinder tube, and ensure the dry and clean air, if possible, freeze dryers , Check that when the amount of oil in each inner cup of the converter is sufficient, the pressure relief valve should not be used for a long time at the back end and should be pushed. When it stops working, the power switch and the compressed air control valve should be turned off; the shaft barrel and each part should be Avoid magnetic loss; Assemble the side sliding seat parts of the workbench and the precision and high complexity, they should be cleaned frequently and oiled for maintenance to prevent the accuracy of rust. Pay attention to the environment and machine maintenance. Cyclophosphamide induces to keep the environment of the fabric production workshop clean, especially the exposure glass, which needs to be cleaned before work. From an ordinary cleaning and maintenance development, voltage and power testing, it should be ensured that the voltage is in its use. In order to avoid the voltage being too high or too low, it should be set in the dark room of the cold storage or in a low temperature, dry place, especially to avoid sinking, do not use contaminated or do not touch it with your hands. The uniform thickness of the glue wipes often does not pay attention to this work in daily production, and causes local damage to the fabric production board.