Precautions for non-woven wallpaper pasting method
Precautions for non-woven wallpaper pasting method are as follows:
1. Wall treatment
The wall should be flat, clean, dry, uniform in color, and free of voids, unevenness of convexity and concave. The wall should be treated with base film (or varnish) before construction.
2, wallpaper cutting
Place the wallpaper according to the serial number of the wallpaper, measure the height of the wall, set aside 5 cm above and below the height of the wall to cut the wallpaper, remember to cut one roll of wallpaper at a time to prevent quality problems.
3, brush wallpaper glue
The glue for sticking non-woven wallpaper must be evenly painted on the wall, and the thickness is only 2mm. Never brush the glue directly on the back of the non-woven fabric, let alone soak it in water. Unlike other wallpapers, non-woven fabrics should have a thicker and thicker glue than other wallpapers to reduce their fluidity.
4. Wallpapering
Post the non-woven wallpaper in the order compared in advance.
5. Construction wallpaper cutting
It is necessary to lay the sides and cut the construction. The specific method is to lay the sides during the construction. The amount of the sides depends on the pattern, about 3 cm. The plain non-woven fabric is constructed by the method of front and back paste during construction. After making sure that the pattern is aligned, use a ruler to hold down the overlap.
The non-woven wallpaper pasting method is very important. We can all pay more attention to the above notices. The correct way to operate and use the non-woven wallpaper pasting method is also very important to us.