Problems that should be paid attention to in the process of printing non-woven fabrics

1. The problem of plate making. Undoubtedly, plate making is a prerequisite problem such as printing, and it is also the core technology. So what are the problems of plate making in non-woven printing? 1. The problem of plate-making depth and thickness, which affects quality and cost; 2. The problem of plate-making length and effective printing area, this should be designed with your own printing equipment, the savings can be saved, and the ones that should not be saved must not be saved. Otherwise, it may affect the computer, and in severe cases, the copper plate will be directly useless. 3. When designing the pattern, you must pay attention to the tiny places, whether it needs to be enlarged or reduced, whether there should be gaps, etc. 4. Pay attention to the printing and winding direction when making plates. 5. The color code, that is, the problem of the color code, can be tracked by the computer, and the sensitivity is related to the depth of the color code. 2. The problem of the printing process. 1. The important thing is to press the stick, and consider the soft and hard, medium and high. 2. The question of the size of the pressure, the patterns that come out of what pressure is applied must be different. 3. Tension problem, a lot of fabric tension will affect printing. 4. The problem of fabric shrinkage and elasticity, this obvious impact is the printing accuracy problem.